26
(6) Error
Displayed when an error occurs on the printer.
(7) Battery level Indicates the battery level in 5 levels.
(8) STATUS lamp
Lights or blinks in green, red, or orange to indicate the printer status.
Lights up in green: Normal state
Lights up in orange: Low-battery warning state (Operable)
Lights up in red: Low-battery state
Blinks in green or orange: Communicating or internal processing is
in progress or a printed label is waiting to be removed.
Blinks in red: Error state
(9) CHARGE lamp
Lights up in orange while the battery pack is charging and goes out
when the battery charge is completed.
(10) ［POWER］ button
Turns on or off the printer.
How to turn on the printer
While the printer is off, hold down the POWER button for a few
seconds. When “ONLINE” is displayed on the LCD, the printer is
ready.
How to turn off the printer
Hold down the POWER button until the LCD goes off.
(11) [FEED］ button
Feeds media or reprints a previously printed data.
Function of the [FEED] button differs depending on the issue mode.
(12) [PAUSE］ button
Temporarily stops media issue or restarts printing.
Used to recover the printer after clearing an error.
To Next Page
Loading...
Need help?
General