Toshiba B-SX5T Series User Manual

APPENDIX 3 POWER CORD ENGLISH VERSION EO1-33059
APPENDIX 3 POWER CORD
EA3- 1
APPENDIX 3 POWER CORD
When purchasing the power cord:
Since the power cord set is not enclosed in this unit, please purchase an approved one that meets the following
standard from your authorized TOSHIBA TEC representative.
(As of September 2004)
Country Agency
Certification
mark
Country Agency
Certification
mark
Country Agency
Certification
mark
Australia SAA Germany VDE
Sweden SEMKKO
Austria OVE
Ireland NSAI
Switzerland SEV
Belgium CEBEC
Italy IMQ
UK ASTA
Canada CSA
Japan METI
UK BSI
Denmark DEMKO
Netherlands KEMA
U.S.A. UL
Finland FEI
Norway NEMKO
Europe HAR
France UTE
Spain AEE
Power Cord Instruction
1. For use with 100 – 125 Vac mains power supply, please select a power cord rated Min. 125V, 10A.
2. For use with 200 – 240 Vac mains power supply, please select a power cord rated Min. 250V.
3. Please select a power cord with the length of 4.5m or less.
Country/Region North America Europe United Kingdom Australia
Power Cord
Rated (Min.)
Type
Conductor size
(Min.)
125V, 10A
SVT
No. 3/18AWG
250V
H05VV-F
3 x 0.75 mm
2
250V
H05VV-F
3 x 0.75 mm
2
250V
AS3191 approved,
Light or Ordinary Duty type
3 x 0.75 mm
2
Plug Configuration
(locally approved
type)
Rated (Min.)
125V, 10A
250V, 10A
250V, *1
250V, *1
*1: At least, 125% of the rated current of the product.

Toshiba B-SX5T Series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Speed	6 ips
Interface	USB, Serial, Parallel, Ethernet
Ribbon Length	600 meters
Barcodes	UPC/EAN/JAN, Code 39, Code 93, Code 128
2D Codes	Data Matrix, PDF417, QR Code
Media Type	tag
Media Thickness	0.06 – 0.254 mm