Toshiba CANVIO BASICS User Manual

User’s Manual - CANVIO BASICS EN_4
Connecting the drive to your computer
1. With your computer powered on and fully booted up, plug the USB 3.0 Standard-A connector into a USB port of
your host system, or an active USB HUB.
2. Now, plug the USB 3.0 micro-B connector into the corresponding port of the drive itself.
< Windows PC >
Immediately,
 the Power/Data indicator light will illuminate
 the drive will power up
 the drive should mount and a new drive icon should appear in “My Computer”
< Mac >
Immediately,
 the Power/Data indicator light will illuminate
 the drive will power up and is ready to use
 USB 3.0 Micro-B connector  USB 3.0 Standard-A connector
 Power/Data indicator light  USB 3.0 host
backward compatible to USB 2.0
You may need USB 3.0 Express Card Host Controller for your computer if the computer doesn’t have
USB 3.0 port. You also can connect the device to USB 2.0 port of your computer, However the transfer
rate will be downgraded to that of USB 2.0.
1
2
3 4
NOTE

Toshiba CANVIO BASICS Specifications

General

Type	HDD
HDD size	- \
HDD speed	5400 RPM
HDD capacity	2000 GB
Storage drive buffer size	8 MB
Storage drive average seek time	12 ms
Connectivity technology	Wired
Plug and Play	Yes
Product color	Silver
USB version	3.2 Gen 1 (3.1 Gen 1)
USB connector	Micro-USB B
Maximum data transfer rate	5000 Mbit/s
Bus powered	USB
Fingerprint reader	No
Password protection	-

Weight and Dimensions

Depth	119.4 mm
Width	78.7 mm
Height	20.5 mm
Weight	230 g