Toshiba e-STUDIO 3515AC User Manual

66 Troubleshooting for the Hardware
0.Troubleshooting for the Hardware
 When This Screen Is Displayed
Various screens are displayed on the touch panel depending on the state of the equipment. This section describes
how to solve problems with screen examples.
Screen Description / Remedy
The equipment requires adjusting
by a service technician.
Contact your service representative
with the error code displayed on the
right side of the touch panel.
Depending on the location where
the problem has occurred,
[Deactivate] will be displayed. When
you press [Deactivate], you can use
the equipment by excluding the
separated functions. To release this
separated status, adjustment by a
service technician is required.
Never attempt to repair,
disassemble or modify the
equipment by yourself.
You could cause a fire or get an
electric shock.
Always contact your service
representative for maintenance or
repair of the internal parts of the
equipment.
The options with the mark indicated
in the figure are not usable.
To release the detaching condition
of the options, adjustment by a
service technician is required.

Toshiba e-STUDIO 3515AC Specifications

General

Print Speed	35 ppm (A4)
Max Paper Capacity	3, 200 sheets
Memory	4 GB
Hard Disk Drive	320 GB
Dimensions	585 x 640 x 787 mm
Type	Color Multifunction Printer
Functions	Print, Copy, Scan, Fax
Maximum Copy Size	A3
Duplex Printing	Yes
Scanner Resolution	600 x 600 dpi
Warm-Up Time	Approximately 20 seconds
First Copy Out Time (B&W)	5.9 seconds
Scanner Type	Color Scanner
Network Connectivity	Ethernet, USB, Wi-Fi
Resolution	1, 200 x 1, 200 dpi
Control Panel	10.1" color WSVGA touch screen