3.THE INITIAL VALUES
Precautions on the Initial Values 19
THE INITIAL VALUES
Initial value list
Home screen:
[User Functions -User-] Menu
[Admin] Tab
[List/Report] Menu
[Report Setting] Menu
* It is not possible to operate the above menus from TopAccess.
TopAccess:
[Administration] Tab
[Setup] Menu
[General] Sub Menu
* The value can be changed in the [ADMIN] tab in the [User Functions -User-] mode in the touch panel of the equipment.
Item
Initial value for the high
security mode
Remarks
[COMM. Report]
Memory Tx OFF Do not change the setting to “ON”.
Item
Initial value for the high
security mode
Remarks
Device Information
USB Direct Print Disable
Functions
e-Filing Enable Be sure to change the value to “Disable”.
Save as FTP Disable
Save to USB Media Disable
Save as SMB Disable
Save as Netware Disable
Network iFax Disable
Network Fax Disable
Web Services Scan Disable
Twain Scanning Disable
Restriction on Address Book Operation by administrator / AddressbookRemoteOperator
Can be operated by Administrator /
AddressbookRemoteOperator only
Energy Save
Auto Clear * 45 Seconds The initial value is the same as in the Normal
Security Mode; however, OFF cannot be selected.
Home Setting
Port Number 990
Enable SSL/TLS Enable