E6581611
C-9
3
Operation Command : Panel Operation
Frequency Command: Setting Dial 2
(1) Wiring
(2) Parameter setting
Title Function Setting value
Command mode selection
1
Frequency setting mode selection 1
3
(3) Operation
Run/stop: Press the and keys on the panel.
Frequency setting: Turn the setting dial to set the frequency.
To save the frequency setting, press the center of the setting dial.
and the set frequency will flash on and off alternately, then set frequency will
be retained.
The set frequency will be retained even if power supply is cut.
*1: Single-phase models are R/L1 and S/L2/N.
Ex.2
Motor
M
R/L1
S/L2
T/L3
U/T1
V/T2
W/T3
Operation panel
MCCB
PB
PA/+
PC/-
*
RUN STOP
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
Need help?
General