72
1-2. Child safety
LC200_OM_OM60T03U_(U)
â–
Child restraint LATCH anchors
LATCH anchors are provided
for the second outboard seats.
(Buttons displaying the location
of the anchors are attached to
the seats.)
â– When installing in the second outboard seats
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
Adjust the seat
If there is a gap between the child seat and the seatback, adjust the
seatback angle until good contact is achieved.
If the head restraint interferes with the child restraint system
installation and the head restraint can be removed, remove the
head restraint. (ï‚®P. 158)
Take off the covers between
the seat cushion and seat-
back, then confirm the posi-
tion of the LATCH anchors
below the symbol in the seat-
back.
Child restraint system fixed with a child restraint LATCH anchor
1
2
3
To Next Page
Loading...
Need help?
General
