Toyota Land Cruiser 2008 User Manual

62
1-3. Adjustable components (seats, mirrors, steering wheel)
L/C200_U_(L/O_0708)
Driving position memory system
Your preferred driving position (the position of the driver’s seat,
steering wheel and outside rear view mirrors) can be entered into the
computer’s memory and recalled with the touch of a button. It is also
possible to set this function to activate automatically when the
doors are unlocked.
Three different driving positions can be entered into memory.
n Entering a position to memory
Check that the shift lever is set in “P”.
Switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear
view mirrors to the desired positions.
While pressing the “SET” but-
ton, press button “1”, “2” or “3”
until the signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
n Recalling the memorized position
Check that the shift lever is set in “P”.
Switch to IGNITION ON mode.
Press button “1”, “2” or “3” to
recall the desired position.
STEP 1
STEP 2
1
S
E
T
2
3
1
SET
2
3
ITY13C036
STEP 3 STEP 3
STEP 1
1
S
E
T
2
3
1
SET
2
3
ITY13C038
STEP 2

Toyota Land Cruiser 2008 Specifications

General

Brand	Toyota
Model	Land Cruiser 2008
Category	Automobile
Language	English