72
Chapter 14
Manage the Router
• To set up Daylight Saving Time:
1. Select
Enable Daylight Saving Time.
2. Select the correct Start date and time when daylight saving time starts at your local
time zone.
3. Select the correct
End date and time when daylight saving time ends at your local
time zone.
4. Click
Save.
14. 2. Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > System Tools > Diagnostics.
3. Enter the information with the help of page tips:
1 ) Choose
Ping or Traceroute as the diagnostic tool to test the connectivity;
•
Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
•
Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
2 ) Enter the
IP Address or Domain Name of the tested host.