EasyManuals Logo

TP-Link Archer C7 User Manual

TP-Link Archer C7
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 5 -
(WPS)
Slow
Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been
successfully added to the
network by WPS function.
Quick
Flash
A wireless device failed to be added to the network by WPS
function.
(USB on
the rear panel)
Off No storage device or printer is plugged into the USB port.
On A storage device or printer has connected to the USB port.
Table 1-1 The LEDs Description
Note:
1. After a device is successfully added to the network by WPS function, the WPS LED will keep
on for about 5 minutes and then turn off.
2. The router is set to working concurrently in 2.4GHz and 5GHz by default. If you desire to
choose the working frequency, please go to 4.5 Dual Band Selection
.
1.4.2 The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
Power: The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this Archer C7 AC1750 Wireless Dual Band Gigabit Router.
On/Off: The switch for the power.
Wireless On/Off: The switch for the wireless function.
USB: The USB port connects to a USB storage device or a USB printer.

Table of Contents

Other manuals for TP-Link Archer C7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Archer C7 and is the answer not in the manual?

TP-Link Archer C7 Specifications

General IconGeneral
VPN supportPPTP, L2TP, IPSec
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Number of guest networks (2.4 GHz)1
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
WLAN data transfer rate (second band)450 Mbit/s
WLAN data transfer rates supported6, 54, 450, 1300 Mbit/s
Memory card slot(s)-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports4
Supported network protocolsIPv4, IPv6
Firewall securityDoS, SPI Firewall, IP and MAC Address Binding
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Antennas quantity3
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45)
Mac operating systems supportedmacOS
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1, Windows 98SE, Windows NT, Windows XP
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, Status, WLAN, WPS
SIM card slotNo
WAN connection typeRJ-45
Output current1.5 A
Output voltage12 V
Power source typeDC
CertificationCE, FCC, RoHS
Package depth240 mm
Package width330 mm
Package height80 mm
Package weight900 g
Weight and Dimensions IconWeight and Dimensions
Depth160 mm
Width243.5 mm
Height32.7 mm

Related product manuals