Name: TP-Link TL-R480T+
Brand: TP-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Load Balance Broadband Router

Note: These tools are not provided with our product. If needed, please self purchase

them.



Desktop Installation



To install the device on the desktop, please follow the steps:

Set the device on a flat surface strong enough to support the entire weight of the 1.

device with all fittings.

Remove the adhesive backing papers from the rubber feet.2.

Turnover the device and attach the supplied rubber feet to the recessed areas on 3.

the bottom at each corner of the device.

Feet

Bottom of the Device

Notch

Desktop InstallationFigure 2-1

Rack Installation



To install the device in an EIA standard-sized, 19-inch rack, follow the instructions

described below:

Check the grounding and stability of the rack.1.

Secure the supplied rack-mounting brackets to each side of the device with supplied 2.

screws, as illustrated in the following figure.

Rackmounting Bracket

Screw

Bracket InstallationFigure 2-2

Installation

Other manuals for TP-Link TL-R480T+

Questions and Answers:

Need help?

Do you have a question about the TP-Link TL-R480T+ and is the answer not in the manual?

General

Load Balancing	Yes
Power Supply	100-240V AC, 50/60Hz
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Firewall	Yes
VPN	PPTP, L2TP, IPSec
VPN Support	Yes
QoS	Yes
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Network Protocols	TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP
Management	Web-based
Device Type	Router
Firewall Features	IP Filtering, Domain Filtering
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)