TP-Link TL-SG1016D User Manual

2
Chapter 1 Product Introduction
This chapter describes the features of the TL-SG1008/TL-SG1016D/TL-SG1024D
Switch.
1.1 Product Overview
The TL-SG1008/TL-SG1016D/TL-SG1024D Switch provides you with a high-
performance, low-cost, easy-to-use, seamless and standard upgrade to boost your
old network to 1000Mbps. Increase the speed of your network server and
backbone connections make Gigabit a reality. Power users in the home, office,
workgroup, or creative production environment can now move large, bandwidth-
intensive files faster. Transfer graphics, CGI, CAD, or multimedia files and other
applications that have to move large files across the network almost instantly.
The TL-SG1008/TL-SG1016D/TL-SG1024D Switch features a non-blocking
switching architecture that forwards and filters packets at full wire-speed for
maximum throughput, MAC address auto-learning and auto-aging, IEEE802.3x
flow control for full-duplex mode and backpressure for half-duplex mode. It is
compatible with all 10,100 and 1000Mbps Ethernet devices because it is
standard-based. It protects your existing network investments while providing you
with a straightforward migration path to faster Gigabit speeds.
The TL-SG1008/TL-SG1016D/TL-SG1024D Switch is plug-and-play and no
configuration is required. Auto MDI/MDI-X cable detection on all ports eliminate the
need for crossover cable or Uplink port. Each port can be used as general ports or
Uplink ports, and any port can be simply plugged into a server, a hub, a router or a
switch, using the straight cable or crossover cable. Diagnostic LEDs which display
link status and activity, allowing you to quickly detect and correct problems on the
network.
1.2 Features
¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standards
¾ 8/16/24 10/100/1000Mbps Auto-Sense RJ45 ports supporting Auto-MDI/MDIX
¾ All ports Support Full/Half Duplex transfer mode for 10/100Mbps and Full
Duplex transfer mode for 1000Mbps
¾ Supports IEEE802.3x flow control for full-duplex mode and backpressure for
half-duplex transfer mode
¾ Non-blocking switching architecture that forwards and filters packets at full
wire-speed for maximum throughput
¾ Supports MAC address auto-learning and auto-aging
¾ LED indicators for monitoring power, link, speed and activity
¾ Desktop and rack-mountable steel case
¾ Internal power supply

TP-Link TL-SG1016D Specifications

General

10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-TX, 1000BASE-T
Jumbo frames	10000
Forwarding rate	23.8 Mpps
MAC address table	8000 entries
Switch type	Unmanaged
Supported network protocols	CSMA/CD, TCP/IP
Power connector	AC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Product color	Black
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (max)	9.26 W
Heat dissipation	31.6 BTU/h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package type	Box
Package depth	400 mm
Package width	250 mm
Package height	80 mm
Package weight	1850 g
Harmonized System (HS) code	85176990
Maximum cable length	100 m
Compatible operating systems	Microsoft Windows 2000/XP/2003/Vista/2008/7/2012/8/10 MacOS NetWare UNIX Linux
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS

Weight and Dimensions

Depth	180 mm
Width	294 mm
Height	44 mm