TP-Link TL-WN721N User Manual

TL-WN721N/TL-WN722N
Wireless N USB Adapter User Guide
Here you can switch to another adapter installed in your computer. The adapters
successfully installed in your computer will be listed in the drop-down menu if the adapters
are supported by this utility.
3) To switch to Soft AP mode.
Once enabled, the adapter will be able to work as an AP.

Note:
This option is only available in Windows 7 and Windows 8.
4) To change the power save mode.
Figure 4-7
4.3 About
The About screen gives you information about the Driver and Utility versions of the adapter.
Right-click on the
icon in your system tray and select About from the list.
Figure 4-8
32

TP-Link TL-WN721N Specifications

General

Interface	USB 2.0
Wireless Standards	IEEE 802.11b/g/n
Signal Rate	11n: Up to 150Mbps (dynamic)
Antenna	Internal antenna
Wireless Security	64/128-bit WEP, WPA-PSK/WPA2-PSK
Operating System Support	Windows XP/7/8/10
Frequency	2.4-2.4835GHz