RLC-SVX14H-GB
31
Split system installation
Condenser Above the Compressor Chiller
Figure 9 - Condenser above the compressor chiller
RESTRICTIONS
• Total distance between components should not
exceed
61 m (actual) or 91 m (equivalent).
• Elevation difference greater than 30 m (actual) will
result in at least a 2% effi ciency decrease.
Inverted Trap
Height equal to
top of Condenser
Trap
Liquid Line
Discharge Line
Liquid Line
Discharge Line
Inverted Trap
Heght equal to
top of Condenser
To Next Page
Loading...
Need help?
General
