BAS-SVX10C-EN 5
General Information
This section provides a description of the wired temperature sensors, as well as part numbers and
dimensions.
Product Description
Note: The information in this manual applies to both factory and field installed versions of Trane
wired temperature sensors.
Trane
®
wired temperature sensors are compatible with any Trane unit controller that uses a
standard 10 kW temperature input. Temperature monitoring is standard on all models. Additional
features are available on some models:
• Fan control
•System control
• Dual or single temperature setpoint control
• Occupancy (timed override) request function
• COMM module—Optional accessory that provides an RJ22 connection for a Trane service tool
for system communication. Must be ordered separately.
• Hot/cold setpoint thumb wheel—Optional accessory allows selecting a temperature setpoint by
color (red/blue for hot/cold) on thumbwheel, rather than by a number. Must be ordered
separately.
The display sensor (p/n X13790886) has an LCD display and includes an RJ11 (RJ22 compatible)
connection for a Trane service tool for system communication. The following features on this
sensor are configurable:
• Temperature units: Fahrenheit (ºF) or Celsius (ºC)
• Temperature resolution: 1.0, 0.5, or 0.1 degrees
• Ability to display setpoint only (zone temperature does not display)
• Single, dual, or no setpoint
• System settings: auto, off, cool, heat, emergency heat
• Deadband (heat/cool setpoint offset for dual setpoint systems)
• Fan settings: high, medium, low, auto, off
• Occupancy (timed override request) function
• Lockable settings to protect against unauthorized use
• Service pin request
To Next Page
Loading...
Need help?
General
