57
Pub. No. 22-5128-02
69-1216
Constant Temperature
Setpoint Programming
Unlike the first two options, Constant Temperature
Setpoint Programming does not have the Wake, Leave,
Return and Sleep periods. The temperature is set by
pressing the ▲ and ▼ keys.
M12960
Auto
Fan
Mon
AM
Set Program
Setting
Heat
System
Heat
The four periods (for example, Wake) are absent from the display in this mode.
Setting Temperature and Fan Operation
If your thermostat is set for Constant Temperature Setpoint Programming, follow the steps below. Otherwise,
refer to 7-Day Program and Operation, or 24-Hour Program and Operation.
To set the temperature and fan operation:
NOTE: Refer to the section Setting Current Day and Time to set the current day and time, and the section
Setting System and Fan to set the system and fan.
To Next Page
Loading...
Need help?
General
