Triumph DAYTONA 650 User Manual

!!
!
Maintenance and Adjustment
Page 62
TEC0035
2
3
1
1. Upper Level, Front Brake
2. Lower Level, Front Brake
3. Safety Clip
Brake Fluid Level Inspection and
Adjustment
• The brake fluid level in the reservoirs
must be kept between the upper and
lower level lines (reservoir held
horizontal).
• At the rear, remove the seat and rear
bodywork.
• Remove the safety clip (front only).
• Fill the reservoir to the upper level line
using new DOT 4 fluid from a sealed
container.
• Refit the reservoir cap ensuring that
the diaphragm seal is correctly fitted.
• Refit the safety clip.
• At the rear, refit the seat and rear
bodywork.
1. Upper Level, Rear Brake
2. Lower Level, Rear Brake
WARNING: If there has been
an appreciable drop in the
level of fluid in either fluid reservoir,
consult your authorised Triumph
dealer before riding. Riding with
depleted brake fluid levels or with a
brake fulid leak is dangerous and will
cause reduced brake performance
potentially leading to loss of
motorcycle control and an accident.

Triumph DAYTONA 650 Specifications

General

Displacement	646 cc
Transmission	6-speed
Rear Brakes	Single 220mm disc, single-piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Fuel System	Multipoint sequential electronic fuel injection
Engine Type	Liquid-cooled, DOHC, inline 4-cylinder
Max Torque	68 Nm @ 11, 000 rpm
Frame	Aluminum
Rear Suspension	Monoshock with adjustable preload
Front Brakes	Twin 308mm floating discs, 4-piston calipers
Seat Height	825 mm
Dry Weight	165 kg
Ignition	Digital
Final Drive	Chain
Length	2, 060 mm
Wheelbase	1395 mm
Fuel Capacity	17.5 liters (4.6 US gal)