Triumph DAYTONA 650 User Manual

!!
!
!!
!
!!
!
Maintenance and Adjustment
Page 72
WARNING: (continued from
previous page): 24 hours
after fitting, the tyre pressures must
be checked and adjusted, and the
tyres examined for correct seating.
Rectification must be carried out as
necessary.
The same checks and adjustments
must also be carried out when 100
miles have been travelled after fitting.
Use of a motorcycle with incorrectly
seated tyres, incorrectly adjusted tyre
pressures, or when not accustomed
to its handling characteristics may
lead to loss of control and an
accident.
WARNING: Tyres that have
been used on a rolling road
dynamometer may become damaged.
In some cases, the damage may not
be visible on the external surface of
the tyre.
Tyres must be replaced after such use
as continued use of a damaged tyre
may lead to instability, loss of control
and an accident.
WARNING: Accurate wheel
balance is necessary for safe,
stable handling of the motorcycle. Do
not remove or change any wheel
balance weights. Incorrect wheel
balance may cause instability leading
to loss of control and an accident.
When wheel balancing is required,
such as after tyre replacement, see
your authorised Triumph dealer.
Only use self--adhesive weights. Clip
on weights ma y damage the wheel
and tyre resulting in tyre deflation,
loss of control and an accident.

Triumph DAYTONA 650 Specifications

General

Displacement	646 cc
Transmission	6-speed
Rear Brakes	Single 220mm disc, single-piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Fuel System	Multipoint sequential electronic fuel injection
Engine Type	Liquid-cooled, DOHC, inline 4-cylinder
Max Torque	68 Nm @ 11, 000 rpm
Frame	Aluminum
Rear Suspension	Monoshock with adjustable preload
Front Brakes	Twin 308mm floating discs, 4-piston calipers
Seat Height	825 mm
Dry Weight	165 kg
Ignition	Digital
Final Drive	Chain
Length	2, 060 mm
Wheelbase	1395 mm
Fuel Capacity	17.5 liters (4.6 US gal)