L
Lisa PerkinsSep 22, 2025
What does Fault SP04 mean on my True PERFORMANCE 1000?
- EElizabeth TaylorSep 22, 2025
Fault SP04 on your True Treadmill indicates 'No Speed Signal'. Check AC line voltage.
What does Fault SP04 mean on my True PERFORMANCE 1000?
Fault SP04 on your True Treadmill indicates 'No Speed Signal'. Check AC line voltage.
How to fix a True Treadmill with no power?
If your True Treadmill has no power, there are several potential causes and solutions: 1. Ensure the On/Off switch is in the ON position. 2. Inspect the power cord for damage; if damaged, replace it. 3. Check that the power cord is fully seated in the socket at both the unit and the outlet. 4. Use a voltmeter to verify that there is power at the outlet. 5. Check the circuit breaker next to the On/Off switch to ensure it is not open; if it is, reset it.
How do I fix a True PERFORMANCE 1000 Treadmill walking belt that is off center?
To fix a True Treadmill walking belt that's off-center: * Adjust the treadmill rear leveling feet if the floor is uneven. * Adjust the belt tracking.
What should I do if the walking belt on my True PERFORMANCE 1000 hesitates or slips?
If the walking belt on your True Treadmill hesitates or slips when you step on it: * Adjust the belt tension. * Lubricate the running belt.
Why does my True Treadmill make a rubbing sound when I use it?
A rubbing sound from your True Treadmill during operation can be due to several factors: 1. The walking belt may be rubbing against a straddle cover. 2. A foreign object might be stuck under the walking belt. Inspect under the unit and remove any objects.
What does Fault IN03 mean on my True PERFORMANCE 1000 Treadmill?
Fault IN03 on your True Treadmill indicates an Incline Run Fault. You can try power cycling the machine, checking the cable connections, and running incline calibration.
What does Fault IN01 mean on my True Treadmill?
Fault IN01 on your True Treadmill indicates an Incline Stall. You can try power cycling the machine, checking the cable connections, and running incline calibration.
What does Fault IN02 mean on my True Treadmill?
Fault IN02 on your True Treadmill indicates that the Incline is Out of Range. You can try power cycling the machine, checking the cable connections and running incline calibration.
What does Fault CN25 mean on my True PERFORMANCE 1000 Treadmill?
Fault CN25 on your True Treadmill indicates a Firmware Mismatch. You can try power cycling the machine and reconfiguring the console.
What does Fault CN00 mean on my True PERFORMANCE 1000?
Fault CN00 on your True Treadmill indicates a Corrupted Console Configuration. You can try power cycling the machine and reconfiguring the console.