TSC AUTO ID Technology Co., Ltd. 1 Copyright 2009 All Rights Reserved.
Setup and System Commands
SIZE
Description
This command defines the label width and length.
Syntax
English system (inch)
SIZE m,n
Metric system (mm)
SIZE m mm,n mm
Dot measurement
SIZE m dot,n dot
This command is only supported in v6.27 and later firmware.
Parameter Description
m Label width (inch or mm)
n Label length (inch or mm)
Note :
200 DPI : 1 mm = 8 dots
300 DPI : 1mm = 12 dots
For metric and dot systems, there must be a space between parameter and
“mm” or “dot”.
To Next Page
Loading...
Need help?
General
