TSC TTP-343 series User Manual

TSC AUTO ID Technology Co., Ltd. 155 Copyright 2009 All Rights Reserved.
 SET PEEL
Description
This setting is used to enable/disable the self-peeling function. The default setting for this
function is off. When this function is set on, the printer stops after each label printing, and
does not print the next label until the peeled label is taken away. This setting will be saved in
printer memory when turning off the power.
Syntax
SET PEEL ON/OFF
Parameter Description
ON Enable the self-peeling function
OFF Disable the self-peeing function
Example
REM ***SELF-PEELING FUNCTION ON***
SIZE 4,4
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET CUTTER OFF
SET PEEL ON
CLS
TEXT 50,100,"3",0,1,1,"SELF-PEELING FUNCTION TEST"
PRINT 5
See Also
OFFEST, PRINT

TSC TTP-343 series Specifications

General

Print Method	Thermal Transfer
Max Print Width	104 mm
Memory	8 MB Flash
Interface	RS-232
Media Width	25.4 mm - 114 mm
Media Thickness	0.06 - 0.19 mm
Operating System Compatibility	Windows
Processor	32-bit RISC
Power Supply	External universal switching power supply
Operating Temperature	5°C - 40°C
Storage Temperature	60°C
Operating Humidity	20% - 85% (non-condensing)
Storage Humidity	10% - 90% (non-condensing)