TSC AUTO ID Technology Co., Ltd. 36 Copyright 2009 All Rights Reserved.
Syntax
BARCODE X, Y, “code type”, height, human readable, rotation, narrow, wide, “code”
Parameter Description
X Specify the x-coordinate of the bar code on the label
Y Specify the y-coordinate of the bar code on the label
code type
128 Code 128, switching code subset A, B, C automatically
128M Code 128, switching code subset A, B, C manually.
Use “!” as a starting character for the control code followed by
three control codes. If the start subset is not set, the default starting
subset is B.
EAN128 Code 128, switching code subset A, B, C automatically
25 Interleaved 2 of 5
25C Interleaved 2 of 5 with check digits
39 Code 39 full ASCII for TSPL2 printers
Code 39 standard for TSPL printers
Auto switch full ASCII and standard code 39 for PLUS models.
39C Code 39 full ASCII with check digit for TSPL2 printers
Code 39 standard with check digit for TSPL printers
Auto switch full ASCII and standard code 39 for PLUS models.
39S Code 39 standard for TSPL2 printers
93 Code 93
EAN13 EAN 13
EAN13+2 EAN 13 with 2 digits add-on
EAN13+5 EAN 13 with 5 digits add-on
EAN8 EAN 8
EAN8+2 EAN 8 with 2 digits add-on
EAN8+5 EAN 8 with 5 digits add-on
CODA Codabar
POST Postnet
To Next Page
Loading...
Need help?
General
