TSC AUTO ID Technology Co., Ltd. 17 Copyright 2009 All Rights Reserved.
SHIFT
Description
This command moves the label’s vertical position. A positive value moves the label further
from the printing direction; a negative value moves the label towards the printing direction.
For a visual representation, see next page.
Syntax
SHIFT n
Parameter Description
n The maximum value is 1 inch. For 200 dpi printers, the range
is –203 to 203; for 300 dpi printers, the range is –300 to 300.
The unit is dot.
To Next Page
Loading...
Need help?
General
