TSC TTP-343C series User Manual

TSC AUTO ID Technology Co., Ltd. 59 Copyright 2009 All Rights Reserved.
 QRCODE
Description
This command prints QR code.
Syntax
QRCODE X, Y, ECC Level, cell width, mode, rotation, [model, mask,]"Data string"
Parameter Description
X The upper left corner x-coordinate of the QR code
Y The upper left corner y-coordinate of the QR code
ECC level Error correction recovery level
L : 7%
M : 15%
Q : 25%
H : 30%
cell width 1~10
mode Auto / manual encode
A : Auto
M : Manual
rotation 0 : 0 degree
90 : 90 degree
180 : 180 degree
270 : 270 degree
model M1: (default), original version
M2: enhanced version
mask S0~S8, default is S7
Data string The encodable character set is described as below
Encodable character set:
1). Numeric data: (digits 0~9)
2). Alphanumeric data
Digits 0-9
Upper case letters A-Z;
Nine other characters: space, $ % * + - . / : );
3). 8-bit byte data.
JIS 8-bit character set (Latin and Kana) in accordance with JIS X 0201
4). Kanji characters
Shift JIS values 8140
HEX
–9FFC
HEX
and E040
HEX
–EAA4
HEX
. These are
values shifted from those of JIS X 0208. Refer to JIS X 0208 Annex 1 Shift
Coded Representation for detail.
Data characters per symbol (for maximum symbol size):
Model 1 (Version 14-L) Model 2 (Version 40-L)
1). Numeric data: 1,167 characters 7,089 characters

TSC TTP-343C series Specifications

General

Brand	TSC
Model	TTP-343C series
Category	Label Maker
Language	English