TSC AUTO ID Technology Co., Ltd. 60 Copyright 2009 All Rights Reserved.
2). Alphanumeric data: 707 characters 4,296 characters
3). 8-bit byte data: 486 characters 2,953 characters
4). Kanji data: 299 characters 1,817 characters
*If "A" is the first character in the data string, then the following data after "A" is
Alphanumeric data.
*If "N" is the first character in the data string, then the following data after "N" is
numeric data.
*If "B" is the first character in the data string, then the following 4 digits after "B" is
used to specify numbers of data. After the 4 digits is the number of bytes of binary data
to be encoded.
*If "K" is the first character in the data string , then the following data after "K" is Kanji
data.
*If "!" is in the data string and follows by "N", "A", "B", "K" then it will be switched to
specified encodable character set.
To Next Page
Loading...
Need help?
General
