TSC AUTO ID Technology Co., Ltd. 69 Copyright 2009 All Rights Reserved.
TEXT
Description
This command prints text on label
Syntax
TEXT X, Y, "font", rotation, x-multiplication, y-multiplication, "content"
Parameter Description
X The x-coordinate of the text
Y The y-coordinate of the text
font Font name
0: Monotye CG Triumvirate Bold Condensed, font width and height
is stretchable
1: 8 x 12 fixed pitch dot font
2: 12 x 20 fixed pitch dot font
3: 16 x 24 fixed pitch dot font
4: 24 x 32 fixed pitch dot font
5: 32 x 48 dot fixed pitch font
6: 14 x 19 dot fixed pitch font OCR-B
7: 21 x 27 dot fixed pitch font OCR-B
8: 14 x25 dot fixed pitch font OCR-A
ROMAN.TTF: Monotye CG Triumvirate Bold Condensed, font
width and height proportion is fixed
rotation The rotation angle of text
0 : No rotation
90 : degrees, in clockwise direction
180 : degrees, in clockwise direction
270 : degrees, in clockwise direction
x-multiplication Horizontal multiplication, up to 10x.
Available factors: 1~10
For "ROMAN.TTF" true type font, this parameter is ignored.
For font "0", this parameter is used to specify the width (point) of
true type font. 1 point=1/72 inch.
y-multiplication Vertical multiplication, up to 10x.
Available factors: 1~10
For true type font, this parameter is used to specify the height (point)
of true type font. 1 point=1/72 inch.
Note:
(1). The internal font (font #1~#5) pitch between TSPL and TSPL2 is different.
(2). Font “0” and “ROMAN.TTF” internal True Type Fonts are available in TSPL2
language printers, but not TSPL language printers.
(3). If there is any double quote (") within the text, please change it to \["].
(4). If font "0" is used, the font width and font height is stretchable by
To Next Page
Loading...
Need help?
General
