TSC TTP-343C series User Manual

TSC AUTO ID Technology Co., Ltd. 86 Copyright 2009 All Rights Reserved.
TDP-643 Plus
50
50
--
TDP-643R Plus
50
256
--
TTP-342
50
50
256
TTP-342 Plus
50
256
256
TTP-342M
50
50
256
TTP-342M Plus
50
256
256
TTP-343
50
256
256
TTP-344M
50
256
256
TTP-344M Plus
50
256
256
TTP-346M
50
256
256
M23
50
256
256
If "AUTO.BAS" exists in the printer memory, it will be automatically executed upon printer
startup. To disable the auto execution function, please follow the procedures below.
For TTP-245/TTP-343/TDP-245 series, 245C/343C/244CE series
Hold the FEED key and power on the switch. The LED color will be changed as following
pattern.
Orange  red (5 blinks)  orange (5 blinks)  green (5 blinks)  solid green (for
firmware version before V3.37)
Orange  red (5 blinks)  orange (5 blinks)  green (5 blinks)  green and orange (5
blinks)  red and orange (5 blinks)  solid green (V3.37)
Release the FEED key while LED becomes solid green to prevent the printer from running
“AUTO.BAS”.
For TTP-246M/TTP-344M series
Hold the FEED key and power on the switch. The ERROR LED will be on. Printer is now ready
to use.
For TTP-2410M/TTP-246M PLUS series
Hold the PAUSE and FEED keys and power on the switch. “AUTO.BAS” will not be executed
after printer initialization, and will now be ready for use.
Alternatively, hold the PAUSE key and power on the switch. After sensor calibration, the
“AUTO.BAS” will not be executed. Printer is now ready for use.
Syntax
1. Download a program file:
DOWNLOAD [n,] "FILENAME.BAS"
Parameter Description
n Specify memory used to save downloaded files.
n is ignored: Download files to DRAM only. If you would
like to save the files from DRAM to Flash memory before
turning off power, issue the MOVE command to printer.

TSC TTP-343C series Specifications

General

Brand	TSC
Model	TTP-343C series
Category	Label Maker
Language	English