TSI Instruments AEROTRAK 7201-A2F User Manual

4-1
C H A P T E R 4
Installation and
Operation
Installation of the AeroTrak
®
Remote Airborne Particle Counter (particle
counter) consists of:
 Determining the installation location
 Mounting the particle counter
 Connecting tubing
 Connecting the vacuum and sample tubes to the particle counter
Determine the Installation Location
Determine the installation location according to your monitoring needs.
The Remote Airborne Particle Counter can be mounted in any
orientation. It is generally convenient to mount the particle counter to a
flat surface such as a wall, but the particle counter can also be mounted
on or under a table, on the ceiling, inside a vented hood, or a location
close to the point of measurement.
Mounting the Remote Airborne Particle Counter
The Remote Airborne Particle Counter can be mounted using a variety of
mounting brackets and schemes.
TSI provides an optional mounting bracket (TSI P/N 700008) that allows
the particle counter to be easily mounted and removed on a surface (see
figures below).

TSI Instruments AEROTRAK 7201-A2F Specifications

General

Brand	TSI Instruments
Model	AEROTRAK 7201-A2F
Category	Cash Counter
Language	English