TSI Instruments AEROTRAK 9310 User Manual

Getting Started 2-3
Description
Function
Alarm
This connector provides two pins for a contact closure to
control an external alarm. The contact closure is normally
open and rated for 0 to 60 V AC/DC at 1.5A peak, 0.5A
continuous. The “alarm out” connection is rated for 60 V
insulation. The contact is closed under alarm conditions
determined by the programming of the device.
Filter scanner
This connector is used with the optional TSI Electronic Filter
Scanner (TSI P/N 700103).
Probe
This connector is used with a variety of TSI velocity /
temperature / humidity probes.
USB A
This standard USB connector is provided for use with “flash
drive” devices to download data from the instrument and
transfer to a computer or other device. The data files are in
ASCII format for easy use in spreadsheet programs.
This port can also be used to also connect a keyboard.
USB B
The standard USB connector is used to connect the
instrument to a computer running TSI TrakPro™ Lite software
for data downloading and recipe uploading. It is used with a
standard USB cable (included).
Ethernet port
The particle counter is compatible with either 10 or 100 MBps
systems. The green LED indicates that the network is
connected. The yellow LED indicates activity on the
network cable.
Alarm
Ethernet
Port
Pump
Exhaust
Diffuser
Power
Connection
Battery
Access
Filter
Scanner
Probe
USB A
(Flash Drive)
USB B (to
computer)

TSI Instruments AEROTRAK 9310 Specifications

General

Brand	TSI Instruments
Model	AEROTRAK 9310
Category	Cash Counter
Language	English