Operation
31
Log Mode (1–5)
Log Name
Log Name, brings up a virtual keypad to
name the Logged Data file.
Start Date
Start Date, select the date the test will start.
Start Time
Start Time, select the time the test will
start.
Log Interval
The log interval can be set from 1 second
to 60 minutes. It is the amount of time
between logged data points.
Auto Zero Interval
Interval between re-zeroing the instrument
using the Auto-Zero accessory. Model
8533 desktop only.
Test Length
From 1 minute to the limit of the data
storage.
Number of Tests
Number of tests, 1 to 999.
Time between Tests
Time between tests, 1 minute to 30 days.
Time Constant
Time Constant can be set from 1 to 60
seconds. This will control the update rate
of the main screen. It is the rolling average
of data displayed on the main screen and is
not linked to logged data in either Manual
or Program Log modes.
To Next Page
Loading...
Need help?
General
