TSI Instruments Flowmaster 250DL User Manual

TSI will send you a new code in a document that can
be read in Notepad or in MS word. The code format is
as shown.
fd0f77da907e865ac74f29f45efcb76a
Fig. 5.16 Error message if incorrect key
If there is a problem with the procedure or the code,
the error message shown in Fig. 5.16 will appear. If
this happens, click OK and repeat the procedure. If
the same message appears, contact TSI requesting a
new code. If requesting a new code, send the existing
code from your Flowmaster and serial number of your
Flowmaster to TSI.
To apply your new code, follow the procedure outlined
from Fig. 5.12 through to Fig. 5.15. Copy the code that
from the document received and paste into the dialog
box as shown in Fig. 5.13. Follow on screen instructions
to complete the procedure. The reminder messages will
stop appearing on the LED readout of your Flowmaster.
The status message on the device settings dialog box
will be update as per Fig. 5.6.
Fig. 5.12 Applying the new license key
Fig. 5.13 Enter the code key into the box and press
OK
Fig. 5.14 After pressing ‘OK”, information message
appears as shown. Press OK again for next message
Fig. 5.15 And then press ‘OK’ to nish. The calibration
date is now updated on your Flowmaster
Version 2.0 (February 2012) TSI Flowmeters Ltd.20

TSI Instruments Flowmaster 250DL Specifications

General

Brand	TSI Instruments
Model	Flowmaster 250DL
Category	Test Equipment
Language	English