A wide range of adaptors are available that allow
the Flowmaster 250 to work with your pipework
and ttings. The standard tting supplied is to the
internationally recognised 2.5” BSP male thread. Onto
this can be mounted BS Inst. M/F, NH or NST M/F, Storz,
Nor Kuppling, etc.
7
ACCESSORIES
7.1 BALL VALVE WITH BS INST. M/F FITTINGS
The ball valve facilitates speedy and safe static pressure
readings and creates back pressure for taking ow and
residual pressure measurements.
7.2 TRANSPORT & STORAGE CASE
Transport case with castor wheels and extension
handle. Weight 7kg.
Fig. 7.2 Transport case
(Model No. 34-2104)
7.3 ADAPTORS
Fig. 7.3 Selection of adaptors available for use with the
Flowmaster 250
We can also supply to ¾” BSP male, 1” BSP male, 4”
BSP male as standard items. These adaptors are tapered
so as to minimize turbulence and uid restriction,
thereby ensuring minimum interruption to uid ow
and accurate measurements.
7.4 REPLACEMENT BATTERY/MAINS CHARGER
Fig. 7.4 Replacement Battery Pack available
Fig. 7.1 Ball Valve to facilitate static pressure
measurements
Fig. 7.5 Mains Battery Charger available
Version 2.0 (February 2012) TSI Flowmeters Ltd.22
To Next Page
Loading...
Need help?
General
