TSI Instruments PORTACOUNT 8048 User Manual

9
CHAPTER 1
Introduction and Overview
This manual describes both the PortaCount
®
Model 8040 and 8048
Respirator Fit Tester Hardware and FitPro™ Ultra Fit Test Software.
The Model 8040 is designed to measure fit factors of respirators with
a filter efficiency of 99% or greater. The Model 8048 includes
N95-Companion™ Technology, which can fit test any tight-fitting
respirators and all filtering facepiece air-purifying respirators
including: NIOSH Series 100/99/95; and FFP3/FFP2/FFP1
disposables.
Why Fit Test
There are two primary reasons for respirator fit testing:
Verification of
Training
After the individual has received respirator training,
a fit test checks that the person has learned how to
properly put on and wear a respirator without
assistance.
Sizing
It is important to make sure that the individual is
issued a properly sized respirator that is capable of
providing protection when worn properly.
Preparations for Fit Testing
Training the
Trainer
The person conducting the fit test must have a
clear understanding of respiratory protection,
respirators, and fit testing to be effective. Anyone
can master the operation of the PortaCount
Respirator Fit Tester simply by studying this
manual, but the background knowledge required to
proficiently fit test cannot be obtained here.
Consider attending a seminar on fit testing
provided by TSI PortaCount Academy or from
various consultants. Contact TSI for PortaCount
Academy Scheduled training events.

TSI Instruments PORTACOUNT 8048 Specifications

General

Brand	TSI Instruments
Model	PORTACOUNT 8048
Category	Test Equipment
Language	English