TurboChef TORNADO Owner's Manual

LOADING A MENU FROM A SMART CARD
At some point you may be required to overwrite the
existing menu settings with new ones via a smart
card. Please note that once the procedure below is
completed, the old menu settings will be perma-
nently lost.
1. Ensure the oven is in the
OVEN OFF/COOLING
DOWN
mode.
2. Enable the
LOAD MENU function:
a. Simultaneously press the
UP and DOWN keys.
b. Enter the code 6-3-6-8 (M-E-N-U) and press
ENTER.
c. Press 9 to enable
LOAD MENU.
3. Remove the lower access panel (Figure 9).
4. Insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select
LOAD MENU FROM CARD. The menu on
the smart card will load to the oven.
7. When this process completes, the oven will
beep. Remove the smart card and reattach the
lower access panel.
SAVING A MENU TO A SMART CARD
At some point you may be required to save your
existing menu settings to a smart card (for example,
if the control board needs to be replaced). Please
note that once the procedure below is completed,
any existing menu settings on the smart card will be
permanently lost.
1. Ensure the oven is in the
OVEN OFF/COOLING
DOWN
mode.
2. Enable the
SAVE MENU
function:
a. Simultaneously press the
UP and DOWN keys.
b. Enter the code 6-3-6-8 (M-E-N-U) and press
ENTER.
c. Press 9 to enable
LOAD MENU. The oven will
return to
OVEN OFF
/COOLING DOWN.
d. Simultaneously press the
UP and DOWN keys.
e. Enter the code 7-2-8-3 (S-A-V-E) and press
ENTER. The oven will return to the
OVEN OFF/
COOLING DOWN screen.
3. Remove the lower access panel (Figure 9).
4. Insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select
SAVE MENU TO CARD. The menu on the
oven will load to the smart card.
7. When this process completes, the oven will
beep. Remove the smart card and reattach the
lower access panel.
9
ASSEMBLY AND INSTALLATION
FIGURE
9: Insert Smart Card

TurboChef TORNADO Specifications

General

Brand	TurboChef
Model	TORNADO
Category	Oven
Language	English