UNI-T UDP3305S Series User Manual

UDP3305S Series Programmable DC Power Supply User Manual
Delayer storage interface (the file suffix is DLY)
Save and name files by using the knob. The suffix of a list mode file is .LST, and the suffix of a delayer file is .DLY.
The files can also be saved on an external storage medium, such as a U disk.
4.8 Read
Turn on the list mode/delayer function, and press “Storage” to enter the storage interface.
Press the knob to select the parameter group file to be recalled. After pressing the "Read" key, the screen displays
"Load succeeded".
Press the "ESC" key twice to return to the initial interface of list mode/delayer.
Press the "Enable" key to read the stored files.
File read interface
4.9 Waveform Display
UDP3305S series power supply has waveform display function, which can display the output voltage, current and
power of each channel on the screen.
When each channel operates independently, voltage, current and power waveforms of three channels can be
displayed on the screen at the same time. When CH1 and CH2 are in series/parallel mode, only the waveforms of

UNI-T UDP3305S Series Specifications

General

Brand	UNI-T
Model	UDP3305S Series
Category	Power Supply
Language	English