UNI-T UT231 User Manual

9
Model UT231: OPERATING MANUAL
Operation Performed
AC Voltage (main display) + Frequency
(secondary display)
AC Current (main display) + AC Voltage
(secondary display)
Active power (main display) + Phase
angle (secondary display)
Apparent power (main display) +
Reactive power (secondary display)
Power factor (main display) + Phase
angle (secondary display)
Active Energy (main display) + Time
(secondary display)
Temperature
(main display) +
Temperature
(secondary display)
Press LOAD once, MR icon shown, the
Meter displays the next stored reading,
the left secondary display showing the
index increase one.
Press USB once to turn the USB
Button
MENU
Operation Performed
interface on, USB appears and the Meter
beeps.
Press USB again to turn the USB
interface off, USB disappears and the
Meter beeps.
It is invalid at active energy mode.
Press once to enter LOAD mode, MR
appears and the Meter beeps.
Press again to exit LOAD mode, MR
disappears and the Meter beeps.
Press and hold LOAD for 1 second to
display the stored data quickly.
Button
USB
USB
LOAD
Calibrating data. It is not recommended to
calibrate the meter without authorization.
CAL
SAVE
Press once to store single reading, MEM
appears and the Meter beeps.
Press and hold for over 1 second to
continuous store reading, MEM blinks
and the Meter beeps. The index number

UNI-T UT231 Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.02 - 0.5 kHz
AC current range	40 - 1000 A
AC voltage range	15 - 600 V
Temperature measurement range	-50 - 1000 °C
Dimensions (WxDxH)	112 x 39 x 303 mm
Battery voltage	1.5 V

Weight and Dimensions

Weight	601 g