UTD1000 User Manual
4.The upgrade system will determine whether the
upgrade document meets upgrade criteria. When done,
the interface shown in Figure 5-3 appears to prompt :
“Are you sure to update?”
Figure 5-1 Figure 5-2
3.Press [F5] as shown in Figure 5-1 to start the program
upgrade operation. If there is only one upgrade pack in
the USB root directory, go directly to step 4. Otherwise
the upgrade document selection screen shown in Figure
5-2 will pop up. Use the jog dial to select the document
you need, then press [F5] to confirm. To exit upgrade,
press [F1].
To Next Page
Loading...
Need help?
General
