Adju stment of hold off tim e
djustment of hold off time can be used to observe complex waveform (such as pulse string series)
Inhibition time refers to waiting period of digital storage oscillograph to start up trigger circuit again
Digital storage os cillograph will not trigger until inhibition time ends during inhibition period. For instance
as shown in Figure 2-17, the first puls e among a group of pulse ser ies shall be triggered to set inhibition
time to width of pulse string
Please refer to following form for hold off menu
Operating Manual for UTD2000/3000
40
Function menu
Setup
Description
Main time base
1. To open main time base
2. To close view window extension according to main time base after openin
To open extension time base
Hold off
To adjust inhibition time
To Next Page
Loading...
Need help?
General
