30 Adjusting the handset settings
Switching the keypad illumination on/off
¤ . . . use to select Settings OK Display & Keypad OK Key
Illumination Change (= on)
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤ . . . use to select Settings OK Display & Keypad OK Auto
Keypadlock Change (= on)
Activating/deactivating auto answer
When set to auto answer, the handset accepts an incoming call as soon as it is removed from the charging
cradle.
¤ . . . use to select Settings OK Telephony OK Auto Answer Change
( = on)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset back in the
charging cradle. Exception: Press and hold the handsfree key for a further 2 seconds while placing the
handset in the charging cradle.
Changing the earpiece and speaker volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
During a conversation
¤ Press the volume keys / on the right side of the handset
or
¤ Handset Volume . . . use to select the volume Save . . . the setting is saved
In idle status
¤ . . . use to select Audio Settings OK Handset Volume OK . . . then
Ringtones
Ringtone volume
¤ . . . use Audio Settings OK Ringtones (Handset)
OK Volume OK . . . use to select For internal calls and alarms
or External Calls . . . use to set the volume in 5 increments or in cre-
scendo mode (increasing volume) Save
The handset's standby time may be significantly reduced if the display backlight is activated.
The setting will be saved automatically after approx. 3 seconds without saving.
For the earpiece:
¤ Earpiece: . . . use to set the volume
For the speaker:
¤ Speaker . . . use to set the volume
Save setting:
¤ Save
When the telephone rings, you can permanently change the ringtone volume using volume
keys (louder) or (quieter).
To Next Page
Loading...
Need help?
General