UGP 10
22
6.0 INSTALLATION INSTRUCTIONS: READ CAREFULLY
BEFORE INSTALLING ALARM
CAUTION: THIS UNIT IS SEALED. THE COVER IS NOT
REMOVABLE!
6.1 Select proper location (See section 5.0)
6.2 A mounting plate is provided on the back of the alarm. Remove the
mounting plate from the back of the alarm by holding the mounting
plate and twisting the alarm in the direction indicated by the "OFF"
arrow on the alarm cover.
Step A: Wall Alignment
Step B: Alarm Activation Step C: Removal and Installation
Figure 2: Insta
lation Instructions
To Next Page
Loading...
Need help?
General
