2. Insert another dongle into a
USB port of the computer or
laptop PC.
3. Scan the MAC address of
the dongle by using the
MS840B scanner.
4. When being successfully
connected to the dongle, the
scanner will beep shortly one
time with a high tone.
Cradle Mode, Connection (for MS840P ONLY)
Cradle Mode (without SCM support)
In order to establish a proper connection between your computer and a scanner
through a cradle into which a dongle is inserted, we suggest that you follow these
step-by-step instructions:
1. Turn on your computer or laptop PC.
2. Plug the adapter cable into the power socket on the cradle.
15
To Next Page
Loading...
Need help?
General
