Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Turning the PA600 on for the First Time
Powering On
1. Turn on the PA600 by pressing the Power Button on the PA600’s front
panel.
Using the Stylus
CAUTION! Never use anything other than the PA600 Stylus on
the PA600’s screen. Using an object other than the
PA600 Stylus could cause permanent damage.
1. Remove the Stylus from its holder.
2. Hold the Stylus like a pencil.
3. Lightly tap the tip of the Stylus to make a menu choice.
4. Use the Stylus to print letters or numbers into a field or on a form.
English
To Next Page
Loading...
Need help?
General
