8
Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
3. Plug the AC adapter cord into an electrical outlet (3).
Checking the LED status
Terminal LED indicators
from left to right:
-- GPRS/Bluetooth
Communication
-- Scan
-- Power
LED Status Description
Flashing Yellow GPRS module is enabled.
GPRS/Bluetooth
Flashing Blue Bluetooth module is
enabled.
Solid Red Ready for Reading Scan
Solid Green Successful reading
Solid Red Being charged
Terminal
Power
Solid Green Fully charged
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon
appears on the device screen indicating low or very low battery status. In both
cases, perform an ActiveSync operation to back up your data, and then
recharge your device as soon as possible.
CAUTION! Once the device is shut down, you should recharge the device
within 48 hours. Otherwise you will lose all data including files
stored in the RAM memory.
To Next Page
Loading...
Need help?
General
