Unitech UT-101 F User Manual

+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Sales@unitechinstrument.com
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:8
PASSWORD PROTECTED PARAMETER
Parameter
Description
Range
Default Value
Calibration Output Low.
CALL
Strt
Set the output by and key, Press key
to fix the desired output.
----According to output.
Calibration Output High.
CALH
Strt
Set the output by and key, Press key
to fix the desired output.
----According to Output.
Calibration Ambient.
CALA
0032
Set the Ambient by and key, Press
keytofixtheambienttemp.
----According to Output.
Parameter
Description
Range
Default Value
CHANGE PASSWORD PARAMETER
CPAS
New Password.
nPAS
----
Scroll the digit by key, increase by key.
Values between
0000
to
9999
New Desired Password
0000
Symptom Probable Solution
-Sensor break error
-Sensor not connected
-Replace sensor
-Check the sensor is connected correctly
Keypad no
function
-Keypads are locked
-Keypads defective
-Check Keypad continuity?
All LED’s
and display
not light
-No power to controller
-Control circuit failure
-Check power lines connection
-Check Control Supply Voltages.
-Replace keypads
OPEn
ERROR MESSAGE AND TROUBLESHOOTING
zz
Old Password.
oPAS
0000
Scroll the digit by key, increase by key.
Values between
0000
to
9999
Existing Password
0000
As reqd.
4. CHANGE PASSWORD MODE

Unitech UT-101 F Specifications

General

Brand	Unitech
Model	UT-101 F
Category	Controller
Language	English