1110
professional can adjust the pitch and loudness of the
program beep or turn it off entirely.
Adjusting the Volume
The volume on your hearing instruments adjusts
automatically in response to the loud or quiet sounds
around you. Your hearing instruments are set to your
ideal volume by default. Your ideal volume is indicated
by 1 beep. If you have a volume control lever, you can
further adjust the volume. Before adjusting the volume
on your hearing instruments, secure the device on your
ear with your thumb and middle finger. Then using your
index finger, adjust the volume level with the volume
control lever.
Your 360 hearing instruments may also come with an
optional remote control which allows you to adjust your
volume levels. Ask your hearing healthcare professional
for more information on the remote control.
Volume Control
You can adjust the volume by pushing the volume
Operating Instructions
Changing Programs on Your 360
™
Hearing
Instruments
Your 360 hearing instruments may have an automatic
program and up to three additional manual programs.
360’s automatic program will satisfy most of your
listening needs by adjusting to different listening
environments without requiring manual adjustments.
The additional manual programs can be individually
tailored by your hearing healthcare professional to meet
your particular listening needs.
Your hearing instruments have a push button which has
been set for switching between programs. This push
button could also be disabled by your hearing
healthcare professional. If you have an active push
button program control, each time you push the button,
you will move to a new program.
Your 360 hearing instruments may also come with an
optional remote control which allows you to switch
between different listening programs. Ask your hearing
healthcare professional for more information on the
remote control.
Program Beeps
Your hearing devices beep to indicate which program
you are in (i.e. one beep for program 1, two beeps for
program 2, etc.) If you prefer, your hearing healthcare
Program 1 (e.g. Automatic Program) 1 beep
Program 2 (e.g. Group/Party Noise) 2 beeps
Program 3 (e.g. Easy-t/Telephone) 3 beeps
Program 4 (e.g. Music) 4 beeps
Easy-t/Telephone short melody
Easy-DAI short melody
To Next Page
Loading...
Need help?
General
