8 9
2. Preparing the charger
Connecting the power supply
a) Plug the larger end of the charging cable into
the power supply.
b) Plug the smaller end into the USB port on the
charger.
c) Plug the power supply into a power outlet.
d) The indicator light next to the USB port will
light up green when the charger is connected
to the power supply.
a
b
d
c
3. Charging your hearing aids
Low power: You will hear two beeps when the
battery is low. You will have approximately 60
minutes before you have to charge the hearing
aids (this can vary, depending on the hearing aid
settings).
The hearing aid contains a built-in and non-
removable rechargeable lithium-ion battery.
Before using your hearing aid for the rst time, it
is recommended to charge it for 3 hours.
The hearing aid must be dry before charging,
see chapter 18.
Please ensure to charge and use the hearing aid
within operating temperature range:
+5 to +40 ° Celsius (41 to 104 ° Fahrenheit).
Optional Power pack (for Charger Combi BTE )
The Power Pack contains a built-in and non-
removable rechargeable lithium-polymer battery..
Before using your Power Pack for the rst time, it
is recommended to charge it for 3 hours.
Please ensure to charge the Power Pack within
operating temperature range: +5 to +40 °
Celsius (41 to 104 ° Fahrenheit).
a
b
d
c
To Next Page
Loading...
Need help?
General
