23
Note: If more than one Bluetooth audio source is in
range e.g. two Bluetooth stereo devices, uDirect will
connect to only the last connected device. It is not
possible to switch between two Bluetooth audio
sources. (One Bluetooth device must be turned OFF
or moved out of range from uDirect before the second
device is turned ON or moved inside the range of
uDirect).
Connecting to Audio Sources via Audio Cable
(3.5 mm jack)
1. Insert one end of the audio cable into the
headphones socket on the audio player.
2. Insert the other end of the audio cable into the
audio input on your uDirect.
Connecting via Bluetooth
If the audio source is equipped with Bluetooth
functionality or if you use an external Bluetooth
adapter, you can stream audio wirelessly via
Bluetooth. In order to use your uDirect with a
Bluetooth enabled audio device or transmitter, you
must first pair the devices. Please refer to the section
on page 13 “Pairing uDirect with an External Bluetooth
Transmitter” for further details.
To Next Page
Loading...
Need help?
General
