4
Battery Information
Charging the Battery
Your uDirect has an internal,
rechargeable battery. To
charge it, connect the mini
USB into the uDirect, then
plug the charger into a
power outlet. You can also
use the optional USB cable
and charge your uDirect via a USB port of a computer.
For safety reasons, recharge the battery only with
chargers supplied by Unitron.
During the charging process, the battery light will turn
orange. Once the battery is fully charged, the indicator
will turn green.
Charging an empty battery takes approximately 90
minutes. It is safe to leave the charger connected
overnight – the battery cannot be overcharged.
When charging your uDirect for the first time, allow it
to charge for at least 3 hours, even if the battery
light turns green after 90 minutes. Allow the battery
to fully charge and discharge for a minimum of 3
cycles.
A new battery’s full performance is achieved only after
two or three complete charge and discharge cycles.
To Next Page
Loading...
Need help?
General
