UNITY LAUNDRY SYSTEMS UTS29 User Manual

27
Part. 14000001 Rev. 04//2021 ®/™ ©2021 Unity Laundry Systems. All rights reserved.
USAGE STATISTICS
6.0 STATISTICS
Use the Statistics menu to check the cycle count of the machine.
Note: the key function as shown in the gure.
The hot, warm, cold and start buttons are used to navigate the washer menus.
Hot (1) - Up Arrow
Warm (2) - Down Arrow
Cold (3) - Escape
Start - Enter
On initial power up, the machine is in countdown mode for 10 seconds. During the countdown, press [Up]+[Down] to enter
the “Function Menu”. Then select “Statistics”, and press the key [Enter] and then enter the password to enter the “Statistics”
menu.
Statistics
1:Record Data
2:Modi.ClrPw
<Esc>3S=Quit
Function Menu
Statistics
Program Price
<Esc>3S=Quit
The default password is ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓. (warm warm warm warm warm warm warm warm) (2 2 2 2 2 2 2 2)
Default maintenance password: ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ (hot hot hot hot hot hot hot hot) (1 1 1 1 1 1 1 1)
6.1 CHECK RECORD DATA
1:Record Data
1:TotRunCounts
Now 0
<Enter>3S=Clear
Press [Enter] for 3 seconds to clear the data and set the cycle count to 0.
Default maintenance password: ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ (hot hot hot hot hot hot hot hot) (1 1 1 1 1 1 1 1)
Esc Enter
1
2
PROGRAMMABLE CYCLES
Ciclos Programables
START
Arranque
3
Load items in washer and close door
Cargue los artículos en la lavadora y cierre la puerta
Select wash cycle
Seleccione el ciclo de lavado
Press start button
Presione el botón de arranque
INSTRUCTIONS
Instrucciones
1
3
2

UNITY LAUNDRY SYSTEMS UTS29 Specifications

General

Brand	UNITY LAUNDRY SYSTEMS
Model	UTS29
Category	Laundry Appliance
Language	English