OPERATION GUIDE 5-1
5 Maintenance
Cleaning the Machine
CAUTION: For safety purposes, always remove the power cord from the outlet
when performing cleaning.
Always use a soft cloth dampened with alcohol or mild detergent to clean the
machine.
Open the original cover and wipe the platen
and the original cover, as shown in the
illustration.
If the optional document processor is
installed in your machine, open the
document processor and wipe the gray
portion, as shown in the illustration.
If copies appear soiled while using the
optional document processor the slit glass
is dirty.
Toner Container Replacement
If Replace Toner appears on the message display, replace the toner container and
clean the charger and registration roller. Refer to Cleaning the Charger and the
Registration Roller on page 5-4.
Online Help Messages
When Replace Toner is displayed, press left Select (Help) to display the procedure
to replace the toner container.
Press S to display the next step or press T to display the previous step.
Press Enter to exit the online help message display.
2GM_UTAX_ENG_OG.book 1 ページ ２００５年３月４日 金曜日 午後９時４５分
To Next Page
Loading...
Need help?
General
